Wuxi Fenigal Science & Technology Co., Ltd.
Fabrikant en leverancier van industriële en verlichtingsproducten
Wuxi Fenigal Science & Technology Co., Ltd.
Fabrikant en leverancier van industriële en verlichtingsproducten
| Plaats van herkomst: | CHINA |
| Merknaam: | Dupont |
| Certificering: | CE |
| Modelnummer: | SFP-2860 |
| Document: | Model SFP-2860, SFD 2860, S...80.pdf |
| Min. bestelaantal: | 1 pc |
|---|---|
| Prijs: | Onderhandelbaar |
| Verpakking Details: | Standaard exportpakking |
| Levertijd: | 5- 8 werkdagen |
| Betalingscondities: | Western Union, T/T |
| Levering vermogen: | 60000 eenheden per maand |
| 2860 module stroombereik: | 2.0 - 6,1 m3 /uur | 2860 Module stroombereik membraangebied: | 51 m² |
|---|---|---|---|
| 2860 Module Nominale poriediameter: | 0,03 µm | 2860 modulemateriaal: | PVDF |
| Diameter van 2860 module: | 8 inch | 2860 module stroomrichting instellingen: | Externe drukstructuur, doodlopende filtratie |
| Component naocl (max.): | 2.000 mg/l | Component Max Backwash -druk: | 2.5 bar |
| Component Hoofdgebruik: | Waterbehandeling voorbehandeling | Voordelen: | Hoge filtratie nauwkeurigheid |
| Attribute | Value |
|---|---|
| Membrane Area | 51 m² (549 ft²) |
| Flux Range (25°C) | 40–90 LMH |
| Max TMP | 2.1 bar |
| Flow Rate | 2.0–6.9 m³/hr |
| Weight (Empty) | 48kg |
| Target Applications | Industrial wastewater reuse, Seawater pretreatment for desalination, Compact containerized plants, Cooling tower blowdown recovery |
| Parameter | SI Units | US Units |
|---|---|---|
| Filtrate Flux @ 25ºC | 40-120 l/m2/hr | 24-70 gfd |
| Flow range | 2.0 - 6.1 m3/hr | 9.2 - 26.7 gpm |
| Temperature | 1-40ºC | 34-104ºF |
| Max. inlet module pressure (@ 20ºC) | 6.25 bar | 93.75 psi |
| Max. operating TMP | 2.1 bar | 30 psi |
| Max operating air scour flow | 12 nm3/hr | 7.1 scfm |
| Max backwash pressure | 2.5 bar | 36 psi |
| Operating pH | 2-11 | |
Proper start-up of a UF system is indispensable for preparing the membranes for operational service and preventing membrane damage. Adhering to the correct start-up sequence also contributes to ensuring that the operating parameters of the system conform to the design specifications.
Before commencing the system start-up procedures, membrane pretreatment, installation of the membrane modules, instrument calibration, and other system checks should be accomplished. Kindly refer to the product technical manual.
Contactpersoon: Mr. Harry
Tel.: +86-13646187144